This is an archived product!
This product is no longer available and is therefore archived. There are lots of reasons why it could be unavailable: The model is discontinued, renamed, the manufacturer ceased to exist, was sold... you name it. It won't be back in stock, so please do not contact us regarding this product.
Do conact us however, if you bought this exact product in our shop and if you need support!
Stabilizer from RamRods
The Vektor features a taper design, multiple internal damping options and the best combination of stiffness, wind efficiency, and damping that has ever been brought to market.
The Vektor front stabilizer begins at an outer diameter of 0.625” and sleekly transitions down to a 0.5” outer diameter. This allows for more stiffness at the base of the stabilizer where it experiences the most stress, and creates greater wind efficiency at the tip where the stabilizer experiences the highest amount of buffeting and torque from the wind. The Vektor side rods are the same carbon layup as the long rod but feature a 0.5625” to 0.5” taper.
Features:
- Adaptive Weight System – allows for either 1/4-20 or 5/16-24 thread sizes by swapping out the adapter screw.
- VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
- Spine: approx. 90
- Available lengths: 12", 13,5", 15"
- Weight: 105 g (13,5" - Stabilizer only)
- Diameter:
- Long Rod: 0.625″ to 0.5″ Taper (16 mm to 12,5 mm)
- Side Rod: 0.5625” to 0.5” Taper (14 mm to 12,5 mm)
- 5/16-24 threads on both proximal and distal endcap.
- Aluminum endcaps.
- Flat slots in both endcaps (wrench size 11/16") for stabilizer tightening.
- Made in the USA | designed and hand-built by the owners
Optional Features:
- Steve Wijler Edition Tungsten Damping Powder – adds 3 oz of tungsten powder to the distal end of the stabilizer to add internal weight and significant vibration reduction (VIBRO-CORE internal damping is still included).
- As with all RamRods products, the Vektor works perfectly with both compound and recurve. The recommended weight ranges for the front stabilizer are 1-6 oz for crisp feel, 6-25 oz for ideal feel, 25+ for softer feel. This recommended weight range does not account for dampers or decouplers – mass weight that the stabilizer can handle increases when using dampers between weights or between the stabilizer and the weights.
- Side rods can handle roughly double the mass weight for similar reactions.