Carbon shaft from Victory
Victory's VXT is a tapered carbon shaft that has the largest diameter at the tip and becomes thinner towards the rear. This shifts the center of gravity forward, making the front, parallel part of the arrow more resistant while minimizing the influence of crosswinds on the rear part of the arrow.
Main features:
- The spine and weight of each dozen is digitally adjusted for greater precision and consistency
- Nano ceramic coating
- Minimal wind drift due to thin diameter
Technical specifikation:
- Weight tolerance per set of arrows: ± 0.5 gr.
- Inner diameter: 0.166" (4.2 mm)
- Outer diameter:
- Rear end: 0.209" - 0.212" (5.3 mm - 5.4 mm) depending on spine
- Front end: 0.235" - 0.241" (6.0 mm - 6.1 mm) depending on spine
- Straightness tolerance:
- ± 0.001" (Elite)
- ± 0.003" (Gamer)
- ± 0.006" (Sport)
- Material: High modulus Carbon
Spine |
Weight
(GPI*) |
Outer Diameter
Point (Inch o. mm) |
Outer Diameter
Middle (Inch o. mm) |
Outer Diameter
Nock (Inch o. mm) |
Inner Diameter (Inch o. mm)
|
Stock Length
(Inch) |
300 |
8,3 |
.241" / 6,12 mm |
.236" / 6,00 mm |
.212" / 5,38 mm |
.166" / 4,2 mm |
31 |
355 |
7,4 |
.237" / 6,02 mm |
.229" / 5,82 mm |
.207" / 5,26 mm |
.166" / 4,2 mm |
31 |
450 |
7,4 |
.236" / 6,00 mm |
.230" / 5,84 mm |
.210" / 5,33 mm |
.166" / 4,2 mm |
31 |
550 |
7,1 |
.234" / 5,94 mm |
.228" / 5,80 mm |
.210" / 5,33 mm |
.166" / 4,2 mm |
31 |
630 |
7,4 |
.235" / 5,97 mm |
.229" / 5,82 mm |
.209" / 5,30 mm |
.166" / 4,2 mm |
31 |
*Grains pro Inch
Package contains: 12 Shafts, 12 Pin Nocks, 12 Pin Inserts