Plastic vane from Bohning.
New for 2025 are the Bohning Atlas and Alpha vanes. These feature the same profile but are made of slightly different material. The AR1250 is the stiffer of the two. Additionally, the Alpha Vane is a bit lighter than the Atlas.
The vane features an Advanced Torque Apex with a gradual taper to the tail which gives you optimal balance of spin and stealth. The vane measures 2.8″ (71.1mm) in length, 0.45″ in height (11.4mm) for low clearance, and each vane weighs 9.0 grains. At the rear of the vane, you will see a contoured tail which minimizes vane flutter. Less vane flutter reduces noise and helps retain speed. The low profile allows clearance on even the tightest set-ups. This vane excels as a 3D Vane, Hunting Vane, Indoor Target Vane, and is within the specifications to use on NASP arrows.
All Bohning vanes are pre-primed and do not require vane cleaning or pen primers. For the most durable and flexible adhesion, Bohning suggests using Fletch-Tite Platinuml. If faster cure times are needed, BlazerBond or Fletch Fuse adhesives can be used as well.
Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
Height: 0.45"/ 11.5 mm
Length: 2.8" / 71 mm
Weight: 8.5 grains