TopHat Adhesive Bond 5g
Adhesive from TopHat
An adhesive highly suitable for bonding inserts to carbon shafts, as well as for fletching.
Lightly roughen the surfaces to be bonded and clean them with a solvent. Apply a few drops of TopHat Bond to the tip or insert, and insert it into the shaft with a twisting motion until fully seated. The bond is hand-tight after 10-20 seconds, securely set after about 60 seconds, and fully cured after 24 hours. The adhesive can be loosened by heating to approximately 150°C. When heating the tip, ensure that only the metal parts (insert or tip) are heated.
An adhesive highly suitable for bonding inserts to carbon shafts, as well as for fletching.
Lightly roughen the surfaces to be bonded and clean them with a solvent. Apply a few drops of TopHat Bond to the tip or insert, and insert it into the shaft with a twisting motion until fully seated. The bond is hand-tight after 10-20 seconds, securely set after about 60 seconds, and fully cured after 24 hours. The adhesive can be loosened by heating to approximately 150°C. When heating the tip, ensure that only the metal parts (insert or tip) are heated.
Irritant / Harmful to Health
Product contains cyanoacrylate.
Danger. Bonds skin and eyelids within seconds. Keep out of reach of children.
Last Updated: Monday, 2025-01-20 21:09
| Product Code | Variant | EAN / GTIN | Stock | Delivery Time |
|---|---|---|---|---|
| 116890-1012-1 | - | 4251306904608 | 2 |
1-3 Business Days |
Information on product safety in accordance with EU Regulation 2023/988
Manufacturer:
Arc&Us UG
Wiesentalstrasse 79
79618 Rheinfelden
Germany
support@arc-and-us.com
Manufacturer:
Arc&Us UG
Wiesentalstrasse 79
79618 Rheinfelden
Germany
support@arc-and-us.com
This product was added to our catalog on Monday, January 20, 2025.