Tapered aluminium shafts for indoor use from Easton. Designed for recurve shooters who cannot shoot large diameter arrows due to a lower draw weight. The shaft has a larger diameter at the front than at the rear, so that it achieves lower spine values than comparable arrows of the X7 and X23 series.
The shaft is approved for World Archery competitions.
The shafts are delivered with Super-Uni Bushings (suitable e.g. for Beiter 19/1 or 19/2 Nocks).
Because of the different diameters, the shafts at the nock end and at the point end compare to different parallel aluminium shafts:
| Model |
Point End |
Nock End |
| RX7 23-420 |
2315 |
2312 |
| RX7 22-475 |
2214 |
2212 |
| RX7 21-525 |
2114 |
2112 |
Technical Data:
| |
Point OD |
Nock OD |
ID |
Spine |
Length |
Total Weight
@Length |
-GPI |
| Model |
in |
in |
in |
|
in |
grains |
grains / inch |
| RX7 23-420 |
23/64 = 0.3649 |
0.3590 |
0.3350 |
420 |
33.75 |
351 |
10.4 |
| RX7 22-475 |
22/64 = 0.3482 |
0.3450 |
0.3205 |
475 |
33.5 |
327 |
9.7 |
| RX7 21-525 |
21/64 = 0.3282 |
0.3240 |
0.3000 |
525 |
32.5 |
303 |
9.3 |
